I was resetting the lambda today on my 92 190E2.6 after a good cleaning of the sensor plate and throttle body. As I usually do once a year, I check and clear the codes int the engine computer. Every time over the last several years, I have always noticed error codes for the EGR and Air Pump. The MB dignostic manual only states that the codes are (11 & 16) are EGR and Air pump. I know that both are functioning when I check them but was wondering what the computer is looking at to determine these errors. As far as I can tell, the only electrical thing I can see are the vaccume solenoids and Air pump clutch. I have changed the OVP relay within the last year due to the ABS light comming on. Any ideas are welcome.
Thanks Rod |
The computer checks with the O2 sensor at different times to be sure that these are operational. There are very specific times that it does these checks.
A vacuum line that has a pinhole is the most likely cause in this case. ------------------ Benzmac: Donnie Drummonds 300E ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM OWNER OF MB AUTOWERKS .COM |
All times are GMT -4. The time now is 04:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website