PeachParts Mercedes-Benz Forum - How to adjust linkage so kickdown switch works

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Tech Help (http://www.peachparts.com/shopforum/tech-help/)

- - How to adjust linkage so kickdown switch works (http://www.peachparts.com/shopforum/tech-help/10360-how-adjust-linkage-so-kickdown-switch-works.html)

Joe	11-13-2000 02:44 PM

My accelerator pedal on my 240D never makes contact with the kickdown switch when the pedal is as far down as it can go. When the pedal is in this position, the injection pump is at the full throttle stop limit.

What linkage rod do I adjust? The linkage looks tricky given all the parts in it.

thanks
joe

Benzmac

11-13-2000 08:34 PM

You should take this to a MB tech. Any time you change the settings of the throttle linkage, it could bind somewhere else and cause major problems.

------------------
Benzmac:
Donnie Drummonds
300E
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM
OWNER OF MB AUTOWERKS .COM

All times are GMT -4. The time now is 12:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website