|
|
|
#1
|
||||
|
||||
Stainless Steel Screws Needed
Where can I get 10 MM hex head stainless steel screws for holding the fuel pumps to the frame of a 1989 420 SEL? These mercedes part numbers 007976 006203 sheet metal screws are just zinc coated. The old ones are rusted real bad, and heads rounded on the first turn. They look like a M6 10MM hex head sheet metal screw about 3/4" long. Any leads?
__________________
1989 420 SEL Last edited by Cigar Havana; 10-19-2004 at 10:58 PM. |
#2
|
||||
|
||||
My neighborhood hardware store has an assortment of metric stainless steel hardware. I bet I could find that size here if you can't find it locally.
Edit, I know they would have machine screws, but I don't know about sheet metal screws.
__________________
Palangi 2004 C240 Wagon 203.261 Baby Benz 2008 ML320 CDI Highway Cruiser 2006 Toyota Prius, Saving the Planet @ 48 mpg 2000 F-150, Destroying the Planet @ 20 mpg TRUMP .......... WHITEHOUSE HILLARY .........JAILHOUSE BERNIE .......... NUTHOUSE 0BAMA .......... OUTHOUSE |
#3
|
|||
|
|||
#4
|
|||
|
|||
I wouldn't worry about metric size in a sheet metal screw, especially in that location - just get a standard size that's close.
My .02.
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
#5
|
|||
|
|||
SS Screws-Fastenal
Call Fastenal and they should have what you want.....It is a chain of fastener products....Jim
__________________
James A. Harris |
#6
|
||||
|
||||
McMaster Carr for all your industrial supply needs.
__________________
Norm in NJ Next oil change at 230,000miles |
#7
|
||||
|
||||
Searched
This is quite a popular screw in the 126 class cars. It is also used on the exhaust manifold to hold on the aluminum heat shields. The dimensions of the screw are 10 MM hex head, 12 MM length, 6 MM diameter. I sent Mcmaster Carr, Fastenal and Space Air Supply an email. None had it in their on-line catalogs.
Thanks for the leads.
__________________
1989 420 SEL |
#8
|
|||
|
|||
screws
i have some original new ones from mercedes at work, let me know if you want them
Ray |
#9
|
||||
|
||||
metric SS screws
well i keep a box of almost every size of metric screws and bolts [hex head cap screws HHCS]. i can get them because i buy from an industrial fastener company. when ever i work on the 72 especially i replace all the screws and bolts i come across with SS.
look for an industrial type Fastener company. they have access to this stuff. you can also order over the internet at McMaster Carr. they are in chicago, il area code is 630. sorry i'm not at work or i could give you their number. my local guy is Sanders Indiana Hardware. 219-465-4090 ask for debbie and tell her that craig sent you. i'm sure you'll have to prepay or go cod but i'd bet you she can help. good luck
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
#10
|
|||
|
|||
try marine supply
Cigar,
I don't know that you'll find metric sizes, but marine supply places have lots of stainless parts. Good Luck. Chuck |
#11
|
|||
|
|||
Why Not Metric
His address is Toronto, Canada and Fastenal has about 100 outlets in Canada.....Jim
__________________
James A. Harris |
#12
|
||||
|
||||
SAE.... #14 (1/4") X 1/2" hex head sheet metal screw is almost the EXACT same size.
The main difference is the hex is 3/8" instead of 10mm.
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
#13
|
||||
|
||||
Do you have a West Marine in town? You'd be supprised at the assortment of SS screws/bolts they carry.
__________________
'84 300CD Turbo 132k (Anthracite Grey) - WVO - My daily driver - Recently named coo-coo-coupe by my daughter. '84 300D Turbo 240k (Anthracite Grey) - Garage Queen '83 300D Turbo 220k (Orient Red) - WVO - Wifes daily driver I'm not a certified mechanic, but I did stay at a HolidayInn Express last night. |
#14
|
|||
|
|||
MSC (www.mscdirect.com) has some PN 67758524 which is #12 x 3/4" 18-8 stainless "hex washer head slotted" but you have to buy 100 pcs at 12.60. They also have really good prices on special auto repair tools such as tie rod end pullers, filter wrenches, seal pullers etc. Their catalog weighs about 20 lbs!!
Mike
__________________
1998 C230 330,000 miles (currently dead of second failed EIS, yours will fail too, turning you into the dealer's personal human cash machine) 1988 F150 144,000 miles (leaks all the colors of the rainbow) Previous stars: 1981 Brava 210,000 miles, 1978 128 150,000 miles, 1977 B200 Van 175,000 miles, 1972 Vega (great, if rusty, car), 1972 Celica, 1986.5 Supra |
#15
|
||||
|
||||
Another fastener place online. http://www.boltdepot.com/
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
Bookmarks |
|
|