|
|
|
#1
|
|||
|
|||
alarm module 93 300E 3.2
Need to disconnect the module, the alarm keeps going off while driving.
Does anyone know the proper location of the module so I can disconnect the fnnn thing before my wife kills me.
__________________
Thanks, Juan |
#2
|
|||
|
|||
Remove passenger's floormat. There's a black plastic "trap door" secured by one philips screw, up against the firewall. Underneath there's a box that says Becker on it. Unplug the connectors.
|
#3
|
|||
|
|||
Well just updating this thread in case another poster has a similar problem that needs to disconnect the alarm.
If you unplug both connectors to the alarm module the car won't start, you have to jumper 1 and 16 terminals on the large connector to start the car. Other than that , It works. no more alarms.
__________________
Thanks, Juan Last edited by deportes; 09-17-2004 at 09:09 AM. |
#4
|
|||
|
|||
Need a bit of assistance with "jumper" instruction
Hi there,
As luck would have it, we have been experiencing trouble with the alarm on our 1993 300E - fortunately, I found this forum! Can you provide more instruction on how to "jumper 1 and 16 terminals" on the Becker connector? Thanks a bunch! Aly |
Bookmarks |
|
|