400e MAF Question
 

im ready to hook up my wet nitrous nozzle. However im afraid if i spray it on top of the MAF that as soon as it sees it it will go full rich. Im thinking about drilling into the maf housing and making it flush with it so it doesnt spray into the maf. What do you guys think? Also how do you get the MAF housing off. Looks like just a hose clamp but its hard as hell to get too. Thanks.

I would put it into the plenum. Putting it through the mAF will totally skewed the airflow reading, and probably terminally screw the MAF.

i took the plenum off. Im going to put it right with the maf so that it doesnt spray onto it. I think ill try a dry shot onto the maf first tho see how it works out. ill see though.