![]() |
W140 92 Model locks itself
When I close my boot the central locking motor activates and locks the whole car, this can happen with the key in the ignition (not funny).By chance I have worked out it only happens when the boot light is connected. All other locks and self-closing functions work perfectly.Please help. Must have happened to someone else, please reply :confused:
|
Update on locking system
After checking all lock switches and wiring (with the problem still there) I decided to remove the pump (under rear seat) and open it up. Well someone had a lot oft time and ingenuity to desin that one. I dismantled it, checked the circuit board for pad solder spots, checked vacuum hose connections and re-seated them. So realy I found no fault with the pump at all. (What have I disturbed to fix it??). After the pump was re-installed I initialised the remote key and all is working fine. Time will tell , I still carry a second key tough!
|
Not funny
Quote:
|
New update on locking system
Well, after about two weeks the car locked itself again. I ended up bying a new pump and conversion kit (which the new pump requires) and the system is now working fine.
|
All times are GMT -4. The time now is 05:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website