Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-16-2004, 09:58 PM
Registered User
 
Join Date: May 2003
Location: Boonville Indiana
Posts: 2,342
Sun Roof

I have removed a sun roof complete with cable. The sun roof is retracted about half way...I am trying to remove the slides(runners??). Any ideas on how to remove the roof to access all the internal parts...thank you Jim

__________________
James A. Harris
Reply With Quote
  #2  
Old 12-16-2004, 11:31 PM
Registered User
 
Join Date: Aug 2001
Location: Evansville, Indiana
Posts: 8,150
Jim:

What car?

Peter
__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!
Reply With Quote
  #3  
Old 12-17-2004, 12:03 AM
Registered User
 
Join Date: May 2003
Location: Boonville Indiana
Posts: 2,342
126

The Sunroof is from a 1984-380SE. Excuse me....thank you for your reply...Jim
__________________
James A. Harris
Reply With Quote
  #4  
Old 12-17-2004, 06:59 PM
Registered User
 
Join Date: Aug 2001
Location: Evansville, Indiana
Posts: 8,150
Sunroof has to go back further to completely remove, but you can drop the headliner at this point. There are four clips about an inch back from the front egde. Use a putty knife to pry these out, and the headliner will come loose. Slide it back, and you will have access to the lift angles and rails.

To remove the headliner properly, you need to get the roof back far enough to take the chrome rails off (phillips screws, leave the slotted ones at the front alone, they are the height adjustment). Loose the screws holding the front guides on the roof panel and push inwards, then take out the rails and the headliner will come out the opening upwards.

The roof panel is held to the slides by two bolts on each side and the front guides. Run panel back forward (completely closed is best, but if one of the angles is broken, it may not go that far). If it doesn't tilt up, it's easier to work on, is identical to the tilting model except the slides don't hinge.

With the roof panel off, remove the three screws on each side that hold the slides to the translation bridge. Cable is held on by two screws on the bridge.

Lift angles "hook" under the sides of the opening, rotate them upwards and outwards to remove.

If it is just sticky, some MB sunroof paste will usually cure it (don't use anything else to lubricate it). If the angles or slides are broken, get new ones.

Peter

__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page