Common tools required for W126
I am about to start doing some mechanical servicing on my 89 560SEL.
Having worked on a range of non European cars over the years I have a reasonable selection of tools but don't have an hex head gear. Can anyone recommend some standard bits that are needed? Cheers Matt. |
11,13,17, 19 and 21mm sockets and wrenches.. those come up right of the top. I am sure others will chime in.
|
smaller sizes as well
I'd recommend some allen sockets ( allen drives that fit a ratchet) for 5mm or higher, up to at least 13. Depending on the engine, some allen head drivers that have the ball end that allow a 10-20* offset.
Chuck |
Don't forget a good Service Manual, sometimes the best tool in the box... ;)
Best Regards, Jim |
Quote:
|
All times are GMT -4. The time now is 08:29 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website