|
|
|
#1
|
|||
|
|||
Common tools required for W126
I am about to start doing some mechanical servicing on my 89 560SEL.
Having worked on a range of non European cars over the years I have a reasonable selection of tools but don't have an hex head gear. Can anyone recommend some standard bits that are needed? Cheers Matt. |
#2
|
|||
|
|||
11,13,17, 19 and 21mm sockets and wrenches.. those come up right of the top. I am sure others will chime in.
|
#3
|
|||
|
|||
smaller sizes as well
I'd recommend some allen sockets ( allen drives that fit a ratchet) for 5mm or higher, up to at least 13. Depending on the engine, some allen head drivers that have the ball end that allow a 10-20* offset.
Chuck |
#4
|
|||
|
|||
Don't forget a good Service Manual, sometimes the best tool in the box...
Best Regards, Jim |
#5
|
||||
|
||||
Quote:
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|