Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-02-2000, 05:01 AM
Registered User
 
Join Date: May 1999
Location: Calgary, Alberta, Canada
Posts: 190
I have a 1988 300E that I recently pulled the instrument panel to check my hall effect sensor as my cruise is working intermittently. I will solder the cruise brain as that is probably the problem. I must confess that I forgot to disconnect the battery cable. I don't know what happened but since I plugged the instrument cluster back in, the oil pressure and the tach are not working. Any ideas or suggestions. I checked all the fuses in fuse box with an ohm meter and they all seem to be fine.
Reply With Quote
  #2  
Old 12-02-2000, 10:57 AM
J.HIDALGO's Avatar
Registered User
 
Join Date: Jul 1999
Location: Jax, FL
Posts: 1,785
That happened to me before. I took the instrument cluster out to fix something, when I reinstalled it the tach did not work. I double checked my connections and it was unplugged. Double check the connections. I bet they are unplugged.
__________________
J.H.
'86 300E
Reply With Quote
  #3  
Old 12-02-2000, 08:54 PM
Registered User
 
Join Date: May 1999
Location: Calgary, Alberta, Canada
Posts: 190
I have double checked my connections and they are all good. The tach works but is almost like it is lazy. Will not respond to different revs like at high rpms it is only reading about 3000rpms.
Reply With Quote
  #4  
Old 12-07-2000, 07:38 AM
Registered User
 
Join Date: May 1999
Location: Calgary, Alberta, Canada
Posts: 190
Tell me if the cigarette butt trick might work in the dianostic connector? I am not quite clear on how to do it. Do you just take the cap off the diagnostic connector and put something there to apply pressure or do you take apart the whole connection?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gauge problems after removing cluster schumi Tech Help 4 08-07-2004 09:41 PM
Oil pressure guage patagrande Diesel Discussion 6 06-03-2004 05:17 PM
Oil Pressure gauge dead? dwcasey Diesel Discussion 2 03-08-2002 04:08 PM
New oil & now oil pressure reads differently tracy_leb Tech Help 2 05-10-2000 08:57 PM
83 240D oil pressure ncarter Tech Help 1 03-07-2000 06:39 PM



All times are GMT -4. The time now is 12:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page