injector trouble!! very important!!
 

hello , i'm in trouble, i need some help my car is a mercedes 300D 1980 diesel and I tryed to take out the injector ( more precicelly the addapter for it) without extracting first the warming up plug (i don't know the name in english) and I broke the thread from the second part you take out that goes with a ring. The problem is that I don't want to go on before I see a picture or an engine cut away to prevent breaking more parts. what i need is a picture or the owners manual of the disarming of the motor, please help me!!
thank you very much!
please response to my e- mail : ak_47rammstein@hotmail.com

The injector can be removed without removing the glow plug. The prechamber can not. Terminology will be required to solve this puzzle.

I think he's saying that he broke the glow plug off in the pre-chamber?



Michael

what i did was to remove the prechamber without removing the glow plug before, so it broke down inside the engine, my question is:must i have to take out something else to remove the prechamber?? i did take out half of the prechanber the other half remains there with the thread a little bit broken...thank you very much

Knock the prechamber back down and remove the remains of the glow plug and then finish removing the prechamber. The only thing to really worry about is dropping any pieces through the prechamber, which is fairly hard if it is still intact.

hello, thank you very much for your help!
i have some questions:the only thing i should have removed before removing the prechamber was the glow plug? or there is something else that dont let me remove the prechamber without problems??
ohh, and one more question, how can I do be sure that nothing have fallen down to the piston? how should I take out the fallen things?
thank you very much!!!!!!