PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Stalling 88 300E (http://www.peachparts.com/shopforum/tech-help/115170-stalling-88-300e.html)

coolb2 02-09-2005 09:39 AM

Stalling 88 300E
 
car runs and drives good....but stalls at diffrent times during the day...it dont matter if iam on freeway at a stop sign or driveing down a road ..it do it at any speed..but at diff. times...but it will die and start back up with no problem or delay and drive like nothing is wrong and maybe 10miles later there it goes again..before it dies its like its loseing gas or fire while iam on the gas pedal and when i take my feet off pedal it act like it want to run ide but it will stall..but it start right back up and run good for another 5 to 20 miles..its been doing it for about a month...Please Help..........Thanks

towbarn 02-09-2005 12:19 PM

I dont know but i would check the fuel filter

300holst 02-09-2005 12:32 PM

This happened to the PO of my '86 300E. The shop replaced the fuel and OVP relays. On my Volvos, the Bosch relays tend to develop tiny cracks in the soldering on the PC board. Eventually the cracks open the circuit and the engine stalls. When the current stops flowing through the solder, the solder cools and the crack closes. The engine will then start and run until the solder heats up again. :(

You can replace the relays, $$$$, or open them up and resolder the PC boards, cheap fix. Bosch make relays for both Volvo and MBZ and they have this same problem. :bulb:

haasman 02-09-2005 02:17 PM

Any suggestions on how to open an OVP relay? Which end opens up, the one with the pins.

Haasman


All times are GMT -4. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website