It was -10 this morning, and my turn column was a bit stiff. After making a hard left turn, the turn signal column would not return to its off position. I then noticed it would not move up into the right turn position at all, it seems to be locked out of that position. Hi- beam works fine. Any ideas? I have a 1984 380se, Thanks
|
Remove steering wheel check the cancel ring and switch,mostly is the switch. hope this help.
|
What type of tool do I need to remove the steering wheel? It looks like a large allen wrench might work. Also, is the switch repairable, or should I replace it from the partshop if available, Thanks again
|
That is 10mm allen to remove the nut,switch is not repairable. hope this help.
|
All times are GMT -4. The time now is 02:26 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website