Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-14-2000, 10:25 PM
Registered User
Join Date: May 2000
Posts: 376
If anyone can steer me in the correct direction, I`d be most grateful. Testing the fuel pressure on an 87 16v. It currently has an intermittent cold and hot start problem. It will crank excessively before finally starting. Fuel pressure when not cranking is close to 3 bar. When running the pressure is at spec, 86 psi. Will loose only 1 to 3 psi in 30 minutes so it is close to spec. If it sits overnight, it will bleed down to 15 psi. When I hook in the CIS tester to the cold start valve, it starts right up cold or hot every time. Any ideas as to why this would occur? Should the pressure bleed down overnight? As always thanks for the thoughts. Tinker
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS 79' 280CE- Nice car yorktown5 Mercedes Cars For Sale 1 09-08-2004 12:09 PM
Oil Pressure Guage Keen Diesel Discussion 5 08-07-2004 06:19 PM
Oil pressure guage problem 1988 560sel moedip Tech Help 11 07-05-2004 01:59 PM
560SEC Modified Rear Suspension edwardII Tech Help 11 04-03-2000 08:31 AM
self leveling suspension question Wael El-Dasher Performance Paddock 8 03-19-2000 11:28 AM

All times are GMT -4. The time now is 03:32 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page