PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (
-   Tech Help (
-   -   Wiper Blade Insert R&R (

Jim Anderson 12-15-2000 03:54 PM

I'm trying to replace the wiper blade insert on my 1991 190E (single blade). I have the replacement insert and the service CD but I can't figure out how to get the old one off. There's clips on each end that look like one would have to come off, but how?????

MoTheMerc 12-15-2000 09:02 PM

Hi Jim, I did a reply to this but it ended up under another thread header 'Wiper blade insert', hope it helps anyway...

Benzmac 12-15-2000 09:20 PM

To get the blade off of the car is the first step. You push in on the button and then push the blade toward the wiper motor. Take off the blade.

Now you can pull out the wires that hold in the blade. Take off the blade and install a new one. Reinstert the wires with the center of the bow facing the glass.

Thanks for using MercedesShop as your parts supplier!!

All times are GMT -4. The time now is 05:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website