|
|
|
#1
|
|||
|
|||
Hello everyone,
I have adjusted my drivers side euro light correctly for high and low beam, but my passengers side headlight is not properly adjusted on LOW BEAM ONLY. I cannot even see the beam to adjust it, it looks faintly lit. Could it be a connection problem because of the high beam being aligned ok? It seems to me that if the high beam is correctly adjusted, the low beam should be right? Any input is a great help, Scott Scott
__________________
Scott Chaffin Homepage devoted to my 190E: http://www.scotty-c.com |
#2
|
||||
|
||||
To properly aim your Euros, read the section at: http://lighting.mbz.org/tech/how_to/aim/ I believe they say to aim them on low beam only.
Also, is it possible that the low beam filament is burned out on one side? This wouldn't affect the high beam pattern, but you would see a difference in the low beam light. It could be a defective bulb as well. Try swapping bulbs from left to right. If the problem follows the bulb, it is a bulb problem. If it stays with the same headlight regardless of the bulb, it is a wiring or connector problem. If it goes away completely, it is dirty contacts or a sloppy connector. [Edited by JCE on 12-20-2000 at 01:24 AM]
__________________
John 2003 Firemist Red/grey leather SL 500 2015 Palladium Silver/black mbtex GLK 350 1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD) Click to see 87 300E |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: 126 Euro lights and/or Euro headlight wipers | fintail | Mercedes-Benz Used Parts For Sale & Wanted | 5 | 09-11-2003 06:43 PM |
Euro Headlight left only 190e | Moab_dan | Mercedes-Benz Used Parts For Sale & Wanted | 0 | 06-03-2003 09:59 PM |
New Bosch Euro Headlight LENSES For Sale | ebennz | Mercedes-Benz Used Parts For Sale & Wanted | 2 | 06-21-2002 12:01 PM |
Euro Headlight Wiring Problem.... | riuscire7 | Tech Help | 3 | 04-20-2001 12:06 AM |
Euro headlight wiring for W123 | StrautC | Tech Help | 2 | 03-29-2001 05:14 PM |