Does anyone know how to install one of these into the 190E. I already took out the factory deck but the wiring is driving me crazy. I don't know where I can find a wiring diagram. I just want to make sure I don't do any damage to the car.
Thanks for your help !!!!

i was in your shoes earlier when i was installing a p6000 pioneer in my 85 190e.
You are going to need to bypass the fader switch which was a pain.

Memory (+12v Constant) Red
Ignition (+12v Switched) Black/Yellow
Ground (-) Brown
Illumination Gray/Blue
Dimmer (none) (Though i read that you can tap into the light with the ashtray/cigarette lighter)
Power Antenna Blue

oh yea, technically i think that this post is supposed to be in the audio forum.

Search the audio forum for speaker wire colors and directions on how to bypass the fader.
For more specific 190e info there is a great forum @ Delphi which was created by Clinton. He post on here sometimes.
A href="http://www.delphi.com/MBNZ190E/start">190e forum
later
doug



[Edited by dug on 01-01-2001 at 11:25 PM]