|
|
|
#1
|
|||
|
|||
Window Switch Replacement 1991 190 E
Does anyone know how to remove the console plate (small wood panel) in a 1991 190 E in order to access the window switch? I have to replace the left drivers window switch please help?
|
#2
|
|||
|
|||
Use a small flathead screw driver with something soft covering the tip and carefully pry up the thin plastic border surrounding the shifter. Then use something with an L shaped end (a small allen wrench works well) and pull up on the back, under part of the wood. It should come loose and then you have access to the window switches. Lightly pry open the black plastic tabs surrounding the switch and remove.
Just be careful not to scratch or bend the wood at all as the clear coating cracks extremely easily.
__________________
1992 190E 2.3 150,000 Miles |
#3
|
|||
|
|||
Thank you my friend, with your great info it took about 5 minutes and I didn't manage to crack the clear coat!
Many Thanks Mike |
#4
|
|||
|
|||
If your switches are like my W126's from 1991, you can take it apart and clean and lube it and reinstall ... or, you can do this and swap it to a rear switch - point is that rear switches get very little use and might work for 10 more years ...!
__________________
George Stephenson 1991 350 SDL (200K and she ain't bent, yet) former 2002 E320 4Matic Wagon - good car former 1985 300 CD - great car former 1981 300 TD - good car former 1972 280 SEL - not so good car a couple of those diesel Rabbits ...40-45 mpg |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB: 85 300D working OR broken driver side window switch | jacrouch | Mercedes-Benz Used Parts For Sale & Wanted | 8 | 05-27-2005 05:02 PM |
Window Switch: Completely taken apart | Ron in SC | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 0 | 03-19-2005 04:26 PM |
190 e Window Switch Quick Fix! | euronatura | Tech Help | 1 | 11-12-2003 11:09 PM |
Window Switch Replacement | hightide | Tech Help | 2 | 10-28-2003 08:31 PM |
1981 300D Power window switch only goes down. Can I fix it? or Where to get new? | Erikir | Diesel Discussion | 3 | 04-13-2003 05:29 PM |