Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-03-2005, 10:33 PM
Registered User
 
Join Date: May 2005
Posts: 62
serpentine belt-98 e 320

When replacing the serpentine belt on a 98 e 320, after the idler pulley is moved counterclockwise via the torx-end stud, where does the 5mm pin go to hold the pulley while I refit the new belt? How far does the pulley actually move? I don't want to break anything. Thanks

Dave M

Reply With Quote
  #2  
Old 07-04-2005, 12:25 AM
Registered User
 
Join Date: Sep 2003
Location: Dallas, Tx
Posts: 701
I usually don't put a pin in there to fit the belt, I have never even heard of this. What I do is place the belt around all the accessory pulleys leaving the last bit to fit over the tensioner, pull the tensioner in with your ratchet and slip the belt over it. Make sure the belt is on the outside of the ratchet though, closest to the outside of the tensioner. It is really easy. Good luck.

__________________
Brian W. Heitman

www.MBCA.org/northtexas

Join MBCA!!!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to replace serpentine drive belt ? tseinsf Tech Help 11 07-27-2007 06:40 PM
97 320 serpentine belt replacement DGoff Mercedes-Benz SL Discussion Forum 1 04-25-2005 09:40 PM
Serpentine Belt: Designed to leave you stranded? Ron in SC ML, GL, G-Wagen, R-Class, Unimog, Sprinter 7 08-26-2004 03:22 PM
Alternator and serpentine belt install..Success!!! G-Benz Tech Help 8 10-08-2001 06:13 PM
Questions on serpentine belt on 202 (94 C280)... hancheng Tech Help 5 08-16-2001 12:42 PM



All times are GMT -4. The time now is 04:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page