|
|
|
|
|
#1
01-23-2001, 10:32 PM
|
|||
|
|||
|
MB DOC,
Could you please tell me where the idle valve is located? I have manual on CD. Do you know what group it is in? Using the find option, could only find idle speed air valve, contact 2 and no picture of valve. A while I broke down on the highway and a MB mobil tech, stuck his arm under the air cleaner and plugged a hose in and the car started. How ever i didn't see how he did it. Is this hose hard to replace. (idle valve) At 200K it probably is brittle. 
|
|
#3
01-24-2001, 08:05 AM
|
|||
|
|||
|
The idle valve is in a rubber mount BETWEEN the # 3&4 intake runners. AS I stated before the hose is BELOW the intake manifold, directly in the middle! Can't be seen, only FELT by reaching under the manifold. THE air filter assembly must be removed. If you have large arms the distributor cap has to be removed.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| W201 190e Hella Euro Headlights part number? | Speedtek | Mercedes-Benz Performance Paddock | 2 | 06-12-2002 07:21 PM |
| '91 190E 2.3 part id? | sbourg | Tech Help | 2 | 09-12-2001 02:47 PM |
| Message for M.B. Doc | rainmaker | Mercedes-Benz Performance Paddock | 5 | 08-17-2001 02:16 PM |
| Why is part taking so long?91300TE4M | Hazen | Tech Help | 3 | 03-09-2001 08:50 PM |
| 190E won't run part 2 | glmoy | Tech Help | 2 | 01-23-2001 02:49 PM |
Linear Mode
