Can someone walk me through the R/R procedure to replace the exhaust gaskets for a '90 300SE 103? It looks pretty straight forward.

My concerns are about removal and is there a tightening sequence and torque specs? Do I need to loosen the exhaust pipe?

Thanks in advance.

Any help?

There is nothing really special about this. I would take loose the cross mount to the tranny from the exhaust. Then take the exhaust bolts loose from the bottom.

Next take the nuts off of the head and the manifolds will come off. Clean well and reassemble.

Good luck.

Thanks Donnie,

If you ever need any advice on furniture, let me know.