My CD manual is much easier and faster to use now that I have copied it to my hard drive and made a bookmark to access it directly. If you have a spare gig or so of space, the procedure is simple. Mine is a 124, two disk manual that I copied to my D: drive from my CD drive, G:. Other manuals might take a little experimenting to find the correct bookmark. If you have problems, feel free to email me directly. The procedures are:
Go to the DOS command prompt from the "Start", Program" menu d: <go the the drive that you want the manual on> mkdir 124_1 <make a directory for each CD> mkdir 124_2 cd 124_1 <change directories to 124_1, disk 1> <Insert CD Disk 1 in the drive.> xcopy /s g: <copy everything from G drive> cd \124_2 <change directories to the second directory> <Insert CD Disk 2 in the drive.> xcopy /s g: <Copy the second CD> Open your browser; in the location, enter: file:///d:/124_1/program/matrix.htm This will open the select model window, avoiding the intro and disclaimer pages. Bookmark the link. The location of disk two is the same except change 124_1 to 124_2. Good luck. |
All times are GMT -4. The time now is 02:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website