Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-30-2001, 05:27 PM
cainja
Guest
 
Posts: n/a
My 300D does not blow cold air out of the center vents with the A/C is on. Yes I know that 90% of you guy and gals don't need A/C this time of year, but some of us live on the Gulf Coast and do. Don't you just love it. When I removed the glove box and looked in I saw that the louvered door just flopped around and did not appear to be connected to anything. Also the molded rubber shield which connects the duct outlets with main air duct was not attached. When I turn on the A/C nice cold air is directed out of the center central duct and blows inside the dash. My questions are:
1. Where is the vacuum solenoid located for the ACC?
2. Can the molded rubber piece be repositioned or is it a one time use item?
3. Are there suppose to be lights in the control face of the environmental controls?
4. There is a molded black plastic tube that appears to be a drain, it was laying next to the central duct system, it runs under the glove box and exits near the passenger side panel. What is this?
Please help, its getting hot down here!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
W116 300SD center dash vent question boneheaddoctor Diesel Discussion 4 06-13-2004 07:32 PM
300E Center Vent Problem eds1300 Tech Help 4 05-25-2004 10:18 PM
A strange center vent problem on a 190e. Tinker Tech Help 0 08-18-2003 09:12 PM
center vent problem 85 300td kerry Diesel Discussion 7 10-21-2002 11:37 PM
Lug holes: retap or helicoil? (1975 300D) cscmc1 Diesel Discussion 16 01-15-2002 09:51 PM



All times are GMT -4. The time now is 03:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page