The right rear window regulator failed and I have read almost every post about the situation. I have ordered the new part (awaiting arrival) and removed the door panel.

From looking at the regulator inside the door frame, I see that the wire is outside the motor assembly. Also the glass window sits inside an aluminum strip.

Question: Does the glass need to come out of this bracket or does the bracket attach to the regulator?

Also, should I take off the motor assembly before drilling out the rivets to remove the regulator?

The more details here the better.

__________________
1991 300D 172,000 (totaled)
1998 E300 Turbodiesel 82,500