PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   valve adjustment (http://www.peachparts.com/shopforum/tech-help/135217-valve-adjustment.html)

mitsy 10-24-2005 07:12 PM
valve adjustment
 
i have an overhead 4 cylinder engine and would like to know how to adjust the valves...i.e: where should my cam lobe be when i insert the feeler gauge on each valve???on the low side? the high side? or just before or after the cam reaches it max height...any help will be greatly appreciated

kididler 10-24-2005 08:01 PM
Quote:
Originally Posted by mitsy
i have an overhead 4 cylinder engine and would like to know how to adjust the valves...i.e: where should my cam lobe be when i insert the feeler gauge on each valve???on the low side? the high side? or just before or after the cam reaches it max height...any help will be greatly appreciated
Opposite the lobe... The valve will be fully closed. This is the only time the slack can be measured


All times are GMT -4. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website