w126 engine swap
 

Does anyone have any knowledge about swapping an engine and transmission from a '87 300SDL into an '87 420 SEL? Both are LWB models. I also have the driveshaft and differential with which to do this. Anyone have any experince, thoughts, things to look for?

Thanks, Juergen

to make it easiest you
 

should start with two mechanically complete cars if possible. you should plan on changing the instrument cluster, radiator (may be optional), all the mechanical bits as you have listed above, etc. you may have to switch the oil cooler, but the v8 car prob has one too. there will be some vac lines and wiring to switch too.
i dont see any reason why it wont work.

good luck.

tom w