|
|
|
#1
|
|||
|
|||
My 1987 300e runs great for the first five minutes(aprox)after I start it.When the motor reaches operating temp,the RPMS start to surge.It acts like there is a vacume leak. Another problem I have is the cruse controll.When I engage cruse, the car jerks.The acceleration is not smooth.It keeps doing this till I disengage the cruse.I am totally happy with all other aspects of this car,it accelerates great,handles well and is very comfortable.I forgot to mention it has 95000mi.Hopefully someone can give me some ideas for things to check.
Thanks,Joel |
#2
|
|||
|
|||
Some of the earlier 300E is not equipped with an air pump which compensates the rpm when you use A/C or any other heavy load.
But the rpm isn´t supposed to lower to much. Could be a faulty o2sensor and i have also heard some people adding a resistor in series with the temp sensor to raise the richness and have a more stable engine. Pelle ,300E 4M -89 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebadging '87 300e | emr0591 | Detailing and Interior | 6 | 09-04-2007 09:12 AM |
'86 300E vs '91 300E... Any opinions out there??? | pjtib | Tech Help | 23 | 05-04-2005 09:26 PM |
1990 300E Surging at speed when cold | Mcanix | Tech Help | 0 | 12-20-2003 12:36 PM |
1988 300e surging at idle | walpoleb | Tech Help | 18 | 07-31-2002 02:01 PM |
Transmission Question 1988 300E (Need Technical help)n | china beach | Tech Help | 4 | 03-26-2002 10:25 AM |