Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 11-08-2005, 10:01 AM
Mad Scientist
Join Date: Apr 2005
Posts: 12
240 Water pump Pully removal

Howdy, In the process of removing all the AC stuff from my old 240, I need to get the water pump pulley off to remove two of the AC compressor mount. I have the fan/radiator off and can see the pump pulley, on the center shaft I cannot see any splines, keys or anything to keep it on, I am going to make a small puller (bolts to the pulley, has a bolt down the center to apply pressure to the central hub of the pulley) to remove it but before I do I wanted to know if there is a way to get this off without a puller?

Reply With Quote
Old 11-09-2005, 12:11 PM
Senior Member
Join Date: Jun 2001
Location: Northern Calif. (Fairfield Area)
Posts: 2,225
I am assuming you have an early 240D with a York compressor. You don't need any pullers. You need a long and good quality 10mm end wrench. Remove the 4 bolts that hold the fan to the pump and pulley. Remove the fan and the pulley is free once you remove the belts.
Auto Zentral Ltd.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 01:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page