Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-20-2005, 04:52 PM
Registered User
 
Join Date: Jul 2001
Location: Molalla, Or
Posts: 60
Rear Door Panel on 95 C280

For the benifit of people like me, I wanted to outline the steps to remove the rear panel of the 95 C280. It took me two days to figure it out, and ten minutes to do the job once I stumbled onto the technique.
1. Remove plastic insert from interior door handle.
2. Remove single phillips head screw that is exposed.
3. Revove phillips head screw from near the door latch and remove the plasic piece it holds.
4. Unscrew lock post.
5. Pop off the Up/Down switch cover and disconnect the wire
6. From here everything comes off at once; Armrest etc.
7. Us a wedge (I made mine by sawing a 2x2) to pop off about 5 or 6 snap type connectors until it's hanging free.
8. At the base of the window there are 4 (I think) snaps that you have to lift the panel out of.
9. There is a heavy wire sort of loop connection that you have to kind of wiggle the panel around to disconnect.
10. That should free up the panel entirely and you can set it aside.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page