|
|
|
#1
|
||||
|
||||
How-to change rear spring pads
I want to switch my 2 bump rear spring pads with 1 bump pads. Do I need a spring compressor or can the spring be removed when the shock is off?
Thank you Jorg |
#2
|
||||
|
||||
if you want to risk Serious injury, sure! If not, use the compressor..
Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta |
#3
|
||||
|
||||
I'm not that familiar with the rear end set-up. On some cars the shock restricts the drop of the rear axle when unloaded so when the shock is removed the axle drops enough that the spring is no longer under tension and can be removed with no risk. The 124 is not like that?
Jorg |
Bookmarks |
|
|