On Feb. 17th ... NashvilleDrummer wrote:
>I am replacing the front bumper cap on my 1986 560SL. I have everything removed necessary for replacement with one exception. How do I remove the two front push bumpers (push guards)?
I have removed the two nuts on the bolts below the bumper for the push guards. That did not do it, perhaps there is a secret release? What else is necessary?<

Come on guys. I posted this yesterday and no one has even read the question much less answered, yet I see all kinds of other trivial requests getting tons of response. I may not have some cool handle like: Stud Muffin, or Goldie Locks or be a "thread club" member, but I do have a 560 with the front bumper half dismantled and need some help!
I tried the MB dealer on Friday and they had no tech manual (print or CDROM) in stock.
Surely one of you guys have the manual and could at least answer my question so I can get back on the road!

Thanks!
NashvilleDrummer
1986 burgandy 560LS

click on your model number.

http://www.mbnz.org/W123/

__________________
2000 Ford 7.3 Powerstroke 4x4
2006 Mazda Tribute
1983 Black 300 D (donated to charity)
1993 Teal 300 D (160K) Sold
"I love the smell of burnt diesel fuel in the morning, it smells like ....VICTORY"

Semper Fidelis
USMC 1973-1976

I have a exploded veiw of the front bumper here detailing all the parts I can fax you if you e mail me your fax number. Maybe this will help you

Thanks guys. I am feelin' the love!
Nashville Drummer

The whole bumper must be removed from the car and be disassembled. Each bumper shock is attached to the bumper by two large brackets from the reverse side. I think each bracket is held by two 13mm (wrench size) nuts. The "push guards" are held by a bolt square in the center at the back. It can't be seen till the bumper is removed from the shocks.

The whole bumper will have to be diassembled. It is straight forward once off the car/shocks.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician