500E fuse block connections
 

I had to remove the wiring harness on my 92 500E to repair some damage when the auxiliary fuse holder malfunctioned and shorted out some wiring. I failed to completely document where all the wires hook up on the back of the fuse panel. I have been using the diagriams in the service manual and have made some progress. However, there are certain wire combinations and colors that are not given in the diagriams as well as the diagrams showing wires that don't exist on the harness.

Would anyone be willing to help me out by removing their fuse panel and recording the wire hookups to the power and protected sides of the fuses?

Perhaps closeup photos would work (but the photos I had taken of the area did not work well - did not get close enough to provide the detail needed).

I am not sure if the other years are the same, however I do know that the 400E wiring connections are different that the 500E.

I have also cross posted this request to the 500Estacy site, but I know that this site gets more traffic.

Thanks,
Lee

bump