Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-18-2001, 10:29 PM
longston's Avatar
Another View. . .
 
Join Date: Dec 2000
Location: Mark West, CA
Posts: 787
Let me be the first to mention that you may have noticed banner ads for the new Liquivac that is now available through PartsShop. And the competition does not have it for sale. In fact, the only place that I know of to get one is PartsShop! I was probably the first member here to actually have one in their possession!

The older Topsider design, as many of us know, was bulky, hard to store, sometimes unreliable, and was much more likely to be damaged than the new one is, due to the pump sticking out of the TS at an almost 45° vertical.

In this model, the pump is in the handle, the walls of the tank are real thick, and you can store it in a space the size of the box it came in, 18"x10.5"x7".

The new Liquivac is much more elegant, easier to store, takes up less space, and is virtually indestructible. Well, if you really intended to destroy it, I'm sure you could figure out a way. :p

I love it! The first time I used it, my neighbors all wanted to know what it was, and where I got it! And when I took it to the oil recycler to be emptied, they wanted to know the same things!

And, hey, you can also use it to change transmission fluid, or siphon out fuel...


__________________
"We drive into the future using only our rearview mirror."
- Marshall McLuhan -

Scott Longston
Northern California Wine Country...
"Turbos whistle, grapes wine..."
Reply With Quote
  #2  
Old 02-18-2001, 10:47 PM
dlswnfrd
Guest
 
Posts: n/a
Atta boy Scott

I've seen the new kid on the block, and elegant he am.
All due respect to anything new; but I'll take my El Cheapo 12 volt electric pump and 2 1/2 tank at a cost of less that $20.00 any old time.
My unit is about 8 years old now and has changed my oil every 3500 miles.
If you haven't seen El Cheapo look see at http://home.earthlink.net/~asherson/Don
Happy Trails Beep Beep from Houston!!!
Donald, El Cheapo
Reply With Quote
  #3  
Old 02-18-2001, 10:50 PM
Bill Wood's Avatar
Retired Webmaster
 
Join Date: Mar 1999
Location: Johns Creek, GA, USA
Posts: 5,013
Thank you, Scott, for helping to get us "hooked up". Once we saw the LiquiVac we knew it was meant for MercedesShop!

Besides, with all the attention FastLane is getting we had to do something to spiff up PartsShop.
__________________
Bill Wood - Retired Webmaster
My Personal Website
1998 Mercedes E430
2010 Toyota Sequoia
My Photo Albums
Reply With Quote
  #4  
Old 02-19-2001, 12:04 AM
300EVIL's Avatar
Moderator Incarnate
 
Join Date: Apr 2000
Location: Lake Geneva, WI.
Posts: 1,676
i am interested in purchasing the liquivac topsider for changing my oil. can i still change my oil hot? i like Larry's idea of getting it hot and churned up before draining to remove as much contaminants as possible.
dose the topsider only change cold oil? also, what is the inside diameter of the suction hose?
thanks,
adam
__________________
Current Stable:
01 ML55 AMG
92 500E (a few mods)
87 300E (lots of mods)
00 Chevy 3500HD Diesel Box Truck
68 18' Donzi Marine
06 GT i-Drive7 1.0 Mountain Bike (with GPS!)

PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320

Reply With Quote
  #5  
Old 02-19-2001, 03:52 PM
Bill Wood's Avatar
Retired Webmaster
 
Join Date: Mar 1999
Location: Johns Creek, GA, USA
Posts: 5,013
Quote:
Originally posted by ADAM BOURASSA
can i still change my oil hot? also, what is the inside diameter of the suction hose
No, you should not use the LiquiVac to change your oil hot. It needs to be WARM so that it flows easily but, the temperature should not be over 150 degrees F. Hot oil can distort the tubing and the plastic body of the tank.

The inside diameter of the suction hose is about 0.2 inches.
__________________
Bill Wood - Retired Webmaster
My Personal Website
1998 Mercedes E430
2010 Toyota Sequoia
My Photo Albums
Reply With Quote
  #6  
Old 02-19-2001, 03:57 PM
300EVIL's Avatar
Moderator Incarnate
 
Join Date: Apr 2000
Location: Lake Geneva, WI.
Posts: 1,676
thanks for the reply bill!
Reply With Quote
  #7  
Old 02-19-2001, 05:29 PM
MedMech
Guest
 
Posts: n/a
I want one but where is it in the shop? I have looked all over. Am I missing something? I looked in Fastlane the lobby everything.

[Edited by rsbiomedical on 02-19-2001 at 06:35 PM]
Reply With Quote
  #8  
Old 02-19-2001, 08:01 PM
Bill Wood's Avatar
Retired Webmaster
 
Join Date: Mar 1999
Location: Johns Creek, GA, USA
Posts: 5,013
The banner ads are located at the bottom of every page in the Shop Forum except Tech Help.
There is also a banner at the top of the D.I.Y. page.
__________________
Bill Wood - Retired Webmaster
My Personal Website
1998 Mercedes E430
2010 Toyota Sequoia
My Photo Albums
Reply With Quote
  #9  
Old 02-21-2001, 02:42 PM
longston's Avatar
Another View. . .
 
Join Date: Dec 2000
Location: Mark West, CA
Posts: 787
Hey, rsbiomedical...

You should love this, it's the same color as surgical scrubs!
__________________
"We drive into the future using only our rearview mirror."
- Marshall McLuhan -

Scott Longston
Northern California Wine Country...
"Turbos whistle, grapes wine..."
Reply With Quote
  #10  
Old 02-21-2001, 09:43 PM
MedMech
Guest
 
Posts: n/a
I noticed that! what a deal
Reply With Quote
  #11  
Old 02-21-2001, 10:48 PM
longston's Avatar
Another View. . .
 
Join Date: Dec 2000
Location: Mark West, CA
Posts: 787
Added Bonus!

It could take the place of electrically powered suction in the event of power failure in a triage, or surgical situation!!!
__________________
"We drive into the future using only our rearview mirror."
- Marshall McLuhan -

Scott Longston
Northern California Wine Country...
"Turbos whistle, grapes wine..."
Reply With Quote
  #12  
Old 02-22-2001, 10:37 PM
dlswnfrd
Guest
 
Posts: n/a
Adam changing oil hot

Adam, I too prefer changing the engines motor oil when the oil is hot.
My El Cheapo withstands the elevated temperature experienced from hot motor oil.
I am not in trying to down grade the new kid on the block; there's just another way to do the same job.
Adam try:
http://home.earthlink.net/~asherson/Don
This may file your need.
Happy Trails Beep Beep from Houston!!!
Donald, El Cheapo
Reply With Quote
  #13  
Old 02-22-2001, 11:21 PM
longston's Avatar
Another View. . .
 
Join Date: Dec 2000
Location: Mark West, CA
Posts: 787
But, Don...

If your "custom" rig can handle high temp oil, and you're draining it into a standard gas can, then this Liquivac can definitely take the heat, as it's made from the same materials, it's just a lot thicker than the standard gas can. maybe the manufacturer's warning about heat is just a disclaimer?
__________________
"We drive into the future using only our rearview mirror."
- Marshall McLuhan -

Scott Longston
Northern California Wine Country...
"Turbos whistle, grapes wine..."
Reply With Quote
  #14  
Old 02-22-2001, 11:42 PM
dlswnfrd
Guest
 
Posts: n/a
It ain't the can

Scott, the reply as to hot oil or no, was no because the hot oil may damage the seals in the pump, not damage the container, which by the way my container is 2 1/2 gallons.
You could use any size can you want.
In reading the remarks about the older Top Sider, was mentioned if the slurping sound isn't heard in 15-20 minutes, you should----.
With my 12 volt powered oil pump, it slurps the crankcase empty in 2-3 minutes, not 15-20.
Thanks but no thanks, my unite appears to be the best kid on the block and about 1/2 the price.
Happy Trails Beep Beep from Houston!!!
Donald, El Cheapo
Reply With Quote
  #15  
Old 02-23-2001, 12:09 AM
MedMech
Guest
 
Posts: n/a
Re: Added Bonus!

Quote:
Originally posted by longston
It could take the place of electrically powered suction in the event of power failure in a triage, or surgical situation!!!
I am actually thinking of a 12v Laeradal suction unit I have in my basement that has been taken out of service. It is rechargeable and the whole nine yards. http://www.laerdal.com/cgi-bin/Laerdal.storefront/3a95f061048179f4273fd8a76b170718/Catalog/1089

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
El-Cheapo Topsider Oil Changer y2kimmel Tech Help 7 09-09-2004 09:23 AM
MitiVac Fluid Evacuator vs. Topsider Bob I Tech Help 6 10-03-2003 04:08 PM
Diesel Piston Top design.. esp DI coachgeo Diesel Discussion 5 04-06-2003 11:47 AM
Liquivac to change coolant? discus99 Tech Help 10 12-03-2002 05:09 PM
About topsiders...? Dirty Ern Diesel Discussion 2 05-21-2001 03:12 PM



All times are GMT -4. The time now is 10:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page