|
|
|
#1
|
|||
|
|||
Thanks for previous helpbut still have problem.Central locking pump cycles ok on lock(ie positive pressure)but time cycles out on vacuum side(ie unlock).As there is only one tube at the pump how do I test the system to find the problem?I pulled off the drivers side door lining but the keylock only has wires to it but no vacuum/pressure line,although there is a small short pipe which is part of the(blue color)lock.Any ideas or shortcuts would be appreciated.Thanks Wazza.
|
#2
|
|||
|
|||
Go to the trunk and test the fuel actuator.
Also check the door that is the slowest. You will have to test the vacuum lines individually to find the leak.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
190E wiring query - central locking | greenpc | Tech Help | 4 | 12-11-2014 02:05 AM |
central locking on 126 | downsmith | Tech Help | 3 | 04-24-2003 06:53 PM |
Disobedient central locking 126 | JustinMorrison | Tech Help | 3 | 04-07-2001 11:36 PM |
126 central locking | wazza | Tech Help | 3 | 02-17-2001 09:48 PM |
81 500se 126 central locking | wazza | Tech Help | 4 | 12-30-2000 06:10 PM |