|
|
|
#1
|
|||
|
|||
Blower Regulator - '98 E300/320
Hi!
I just bought a blower regulator for my '98 E300 from Phil. Since the whole motor and regulator needed to be replaced, Phil sold me a unit that work work well with just a change of the electrical connector. I pulled the old one off and it was the wrong size regulator - but it did have white paste on it. Am I supposed to put a paste on it before I put in the new regulator? The part will be here in the morning. If someone could help me out and let me know what they did, so I don't do it wrong. Thanks, Richard |
#2
|
|||
|
|||
Quote:
|
#3
|
|||
|
|||
The white past is for heat transfer since the motor frame acts like a heat sink.
|
#4
|
||||
|
||||
Just to add a source for the heat transfer paste if you need some you can get it from your local Radio Shack.
__________________
2010 ML350 Bluetec 2012 Mustang Convertible |
Bookmarks |
|
|