Does anyone know if there is a Flywheel bolt for an M130 engine that is the same length as the flywheel bolt for the M180 engine? The M130 bolt is 12mm in diameter and the M180 is 10mm. The 12mm in diameter bolt is approximatly 10mm longer than the 10mm in diameter bolt.

Justin

If its a automatic it is 1089900419 x's 6 and for the manual trans its a 1080320171 x's 6 each the ones for the manual are availble in fast lane the automatics have to be special orderd. Hope this helps you

How long are the bolts for the manual trans? I am installing an M130 engine in a 66 230S the bolts must be a certain length. Could you measure them for me?
Justin

ok, after 11 am est check bach here.

Thanks alot.

Your bolt is as follows, 30.23 mm long, the thread on the bolt is 10mm long (just what is threaded) the diameter is 11.68 mm. Good luck!