|
|
|
#1
|
|||
|
|||
This is for a 1983 240D.
The clock does not work. In past postings I have read that if you replace the two capcitors, that the clock will work again and that the capcitors can be replaced for about $1 from Radio Shack. I took the clock into Radio Shack and we were unable to read anything on the capcitors. Could someone tell me the ratings of these capcitors? |
#2
|
|||
|
|||
This web page http://hsb.baylor.edu/html/easley/autofaqs/clock.htm
has the instructions and specifies that the Radio Shack part number is 272-1028. My clock is also broken, but I haven't attempted the fix yet.
__________________
VR 1967 250SL |
#3
|
|||
|
|||
Did you check the 12V connector?
There's a 12V wire that plugs into the back of the instrument console that wasn't connected on my car. I plugged it in and voila I have the time.
__________________
JSR 1983 300D Turbo 1995 E320 Wagon 2001 MR2 Spyder 2001 Subura WRX Sedan |
#4
|
|||
|
|||
You will need 100mfd with a voltage of at least 16v. I use the 32v, 100mfd.
It doesn't fail.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What do I fix first? | willrev | Diesel Discussion | 22 | 12-16-2004 12:51 AM |
Tach Kaput fix or Install 240 Clock | gutefahrt | Diesel Discussion | 2 | 06-06-2004 11:08 AM |
86 190E 2.3 - Tach, clock affected by fastening seat belt | DieselGuy | Tech Help | 5 | 01-22-2003 01:51 AM |
VDO Clock, '75 240D w115 | Fisherman | Diesel Discussion | 6 | 06-11-2002 09:01 PM |
Clock Works Again on '80 300TD | can-do | Tech Help | 5 | 04-15-2001 11:40 PM |