|
|
|
#1
|
|||
|
|||
Installing a Crankshaft sensor on a w220 '00 S500
I've had a problem with my 2000 S500 for a while where it would randomly stall when idle. I had a similar problem where the car would violently shake at idle and found out it was the MAF sensor that I changed but now it stalls sometimes out of no where at stoplights and such. I took it to my friend at a dealership of a comparable company and nothing showed up on the scan. He narrowed it down to the crankshaft sensor (which is what I've been told could be it) and the fuel pump. I just bought the sensor for $70 and now need to install it. Could anyone offer instructions on how to do the job? I did a MAF sensor change which was easy so I hope this'll be the same. Thanks in advance !
|
#2
|
|||
|
|||
The sensor is located on the "flange" of the bellhousing JUST behind the DRIVERS side valve cover.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|