Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-26-2001, 10:19 AM
Registered User
Join Date: Mar 2000
Location: Springfield, MO
Posts: 71
Hello All,

I have a 1987 260e (w124) that someone has cut holes in the lower door panels behind the pockets and the speakers ripped the panel, the pockets have also broke away from the door, can i replace these lower panels with new ones, mine are grey in color, and if so does anyone no the dealer part number for the factory ones with no speakers, also could I use the lower pockets from a later model that had factory speakers there?

1987 260e (w124)

Reply With Quote
Old 02-26-2001, 10:24 PM
Registered User
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Go to the partsshop section and submit a request form. Fitz will look up the part# and price and e-mail you back.
Donnie Drummonds
Reply With Quote
Old 02-26-2001, 11:00 PM
Registered User
Join Date: Mar 2000
Location: Springfield, MO
Posts: 71
Parts Coming In

Have the 2 parts coming in from my dealer, anybody know how the door panal comes off and help would be appreciated.

1987 260e (w124)
Reply With Quote
Old 02-26-2001, 11:27 PM
300EVIL's Avatar
Moderator Incarnate
Join Date: Apr 2000
Location: Lake Geneva, WI.
Posts: 1,676
its not too complicated, but hard to explain. ill try though.
well,,, there is a 10mm. bolt in the door closing handle.
remove the black plastic face around the door handle with a flathead screwdriver. ( be careful not to tear anything!)
remove the bolt. next, remove the screws on the plate that goes around the assembally that latches the door.
then unscrew the door locking knob. lastly, there are two long screws under the armrest unscrew these and carefully pull up on the door. its fiberboard ya know! i hope this helps. best if you get a manual. i figured this out by myself, so, its ont too hard if i can do it.
good luck!
Current Stable:
01 ML55 AMG
92 500E (a few mods)
87 300E (lots of mods)
00 Chevy 3500HD Diesel Box Truck
68 18' Donzi Marine
06 GT i-Drive7 1.0 Mountain Bike (with GPS!)

PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320

Reply With Quote
Old 02-26-2001, 11:31 PM
Registered User
Join Date: Jun 1999
Location: Surrey, Beautiful British Columbia, Canada
Posts: 750
richard, if i were you i would have the dealer
replace it. i remember taking out my door panel
which was easy but putting it back is a challenge
since you have to clip it back to the handle bar.
can not recall exactly how but i know i broke
the clip of those lower pocket. it is still
broken, so i get reminded everytime i look at it.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Diagnostics 1989 260e W124 patkinson Tech Help 4 10-19-2009 01:59 AM
260E 1987 lost acceleration after speeding 120mph andrew1413 Tech Help 10 01-27-2004 05:22 PM
1987 420 sel lower chain rails zeaman Tech Help 1 09-18-2003 09:41 PM
260E Lower ball joint part number?? IZELJIC Tech Help 0 07-10-2003 01:17 AM
Wanna Buy 1 set W124 Lower Door/Fender Trim Manolet Gonzalez Mercedes-Benz Used Parts For Sale & Wanted 0 02-26-2001 12:07 AM

All times are GMT -4. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page