Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-28-2001, 09:34 AM
Posts: n/a

I have a W126 280se 1985 with KA-JETRONIK fuel injection.
I rebuild the whole engine and all marks are aligned like they should
Bud it refuses to run…
I have tried everything, it is getting fuel, and getting spark,
seems like it is getting not enough fuel, or not enough spark?
I can get it to spit and sputter bud that’s all!
Maybe the fuel injection? How can I test it? Does anyone have any ideas where I should be looking?
This car ran perfect until the rebuild and one time it just wouldn't start..
There is a screw on top (allen 3 mm) to affine the richness, what is the initial position of that screw, a guy who pretended to know, F….it up, so maybe..

Please HELP!!!

Reply With Quote
Old 02-28-2001, 07:56 PM
Registered User
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
I e-mailed you on this because you posted this to my e-mail.

From now on, just post here and I'll try to get to it.

Thanks for understanding.
Donnie Drummonds
Reply With Quote
Old 03-10-2001, 03:08 AM
Posts: n/a

Hi guys
the problem was a bend intake valve!
Probably I did something wrong before mounting the head and turned the cams separately so that one valve bended the other…and needed to be replaced!
Now that is resolved, the engine runs, but to fast (1500 rpm)
I tried everything but cannot get a lower idle, what to do?
Any suggestions?


Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil Additives Bill Wood Performance Paddock 6 08-24-2011 10:53 AM
'94 C280 - Intermittent No-Start & Uncommanded Engine Shutdown jgl1 Tech Help 21 05-18-2009 01:01 PM
1969/70 W108, 280S, Incorrect Engine? Busted the distributor. Ted_Grevers Tech Help 1 08-30-2004 09:02 PM
3.2l 24v 300ce Engine In 190e sisco2gs Performance Paddock 12 06-12-2002 01:03 PM

All times are GMT -4. The time now is 08:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page