PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Multimeter leads won't reach opp. sides of car (http://www.peachparts.com/shopforum/tech-help/145671-multimeter-leads-wont-reach-opp-sides-car.html)

Fritz 02-15-2006 03:06 PM

Multimeter leads won't reach opp. sides of car
 
Hi, everyone.

I suspect I have a few bad glow plugs and am trying to diagnose the problem.

I need to connect my multimeter leads to the neg. battery terminal and the glow plug relay. However, the leads that came with the multimeter are too short.

I have found lead kits online, but many don't specify the length of the leads, and they also seem very expensive ($20 leads for a multimeter that cost $15). Can anyone recommend local chains where I can find longer leads?

LarryBible 02-15-2006 03:10 PM

The negative battery terminal is ground. You can connect your lead to most anything metal that you can find in the engine compartment and it will be the same reference point.

Good luck,

rhodes2010 02-15-2006 03:11 PM

Why not use any kind of wire ?
I needed the same thing last week and used solid copper 4 strand
phone wire.
A different time I used some speaker wire.

Especially for really long runs, like when I want to read the meter
while sitting in the car.

You can choose to alligator clips if you plan on doing this a lot.

Fritz 02-15-2006 03:37 PM

Thanks, Larry. I'd forgotten this from physics class... I believe I need to refresh my basic knowledge of electricity.

rhodes, that's a good idea as well. I'll probably just fashion something out of regular copper wire if I need this kind of application in the future.

Mike Murrell 02-15-2006 06:18 PM

I'm curious.

If you were to lengthen the leads, would you now create more resistance(ohms) and skew the readings?

Been a long time since my last physics class as well.

LarryBible 02-15-2006 07:31 PM

Lengthening the wire the distances we are talking about here will not create an appreciable resistance.

Have a great day,

bhatt 02-16-2006 02:49 PM

Or just subtract from the meter reading...
 
Test the wire for resitance from one end to another. Then just subtract that number from each of your meter readings.

For example, if you measure the wire as having 10ohms resistance and then test out a glow plug and get 50 ohms, the actual resistance of the plug is 40 ohms.

Neal


All times are GMT -4. The time now is 01:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website