|
|
|
#1
|
|||
|
|||
After some research I was able to pull the code on the 89 300SE, Code 3 indicated Slipring and Carbon contacts dirty.
Code was not able to reset after cleaning contact ring and carbon connectors. What would be the proper way to proceed from here? |
#2
|
|||
|
|||
Code 3 means the return voltage thru the air bag & wiring was incorrect. Computer sends voltage signal to air bag & expects a return voltage back. Your car isn't sending the correct return voltage back. Too high(low) resistance in wiring, contacts, or air bag.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fault Code 9 – EHA Current illogical | Tony Smith | Tech Help | 25 | 11-19-2012 07:43 AM |
DM DTC Code 4 Question | 104.992 | Tech Help | 20 | 01-26-2005 08:33 PM |
Comand System | albert champion | Tech Help | 10 | 02-16-2004 11:37 PM |
Strange cooling system problem - exhaust gas entering system?? | gsxr | Tech Help | 52 | 01-13-2002 11:10 AM |
SRS Light Constant ON! | David C Klasse | Tech Help | 7 | 01-01-2002 05:39 PM |