![]() |
After some research I was able to pull the code on the 89 300SE, Code 3 indicated Slipring and Carbon contacts dirty.
Code was not able to reset after cleaning contact ring and carbon connectors. What would be the proper way to proceed from here? |
Code 3 means the return voltage thru the air bag & wiring was incorrect. Computer sends voltage signal to air bag & expects a return voltage back. Your car isn't sending the correct return voltage back. Too high(low) resistance in wiring, contacts, or air bag.
|
All times are GMT -4. The time now is 12:14 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website