Duty cycle 500 SL Euro
Hello all,
I performed the overhaul of the V8 intake manifold as shown on the pindelski site. The car runs rougher than before the overhaul despite new injectors and replacement of a cracked intake vent valve. Is it possible that the car had been adjusted to its earlier vac leak that I fixed and hence is now out of proper adjustment? I am getting terrible gas mileage and thought maybe it was too rich. I thought I would test the duty cycle, but my pin 3 in the diagnostic plug is blank. Any thoughts on this? Don't be afraid to speak in lay terms as this is all new for me. Thanks in advance. I searched the site and found some good information, but I need a little help navigating this problem. Rich Mayer 82 500 SL |
All times are GMT -4. The time now is 01:55 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website