|
|
|
#1
|
|||
|
|||
Before buying the parts to fix an idle problem (dying and jumpy) I checked for vacuum leaks under the air cleaner. Found 4 vacuum lines disconnected. This could be the source of my problems!?! I reconnected them but noticed that there is a vertical vacuum fitting on the right side of the manifold between the fuel distributor and the intake side of the manifold. The rubber fitting goes to a splitter that goes to what looks like a sensor and the fuel EHA (I think). This black rubber fitting looks as though molten rubber (1/2 x ½ x 1) was dripped onto the top of the fitting. I cant tell if it was a splitter and melted or this rubber came from somewhere else. Is there any plug in the air cleaner cover that could have fallen out? Has anyone ever seen or heard of such a thing?
Steve 85 SL500 Euro |
#2
|
|||
|
|||
I have not seen what you are talking about. You may want to snap a picture and post it on the net for us to see.
Also, I think your car would have a frequency valve system, not an EHA because of the year.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#3
|
|||
|
|||
Thanks Benzmac, for answering my post. Took me a week to get a digital photo and although I have it on Photopoint, I can't get it shared. I will keep trying but could zip and email it to you directly, but not without your permission.
I have to say that I have not confirmed it, but suspect it was a fix from a vacuum leak a local mechanic made. I will confirm if so before I waste anymore of your time. Steve '85 500SL Euro PS - Yes, it has a frequency valve, not EHA. [Edited by Stevegman on 03-13-2001 at 06:40 PM] |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Please - torque specs on '99 E300 intake manifold and glowplugs!!? | LightMan | Diesel Discussion | 5 | 11-30-2008 04:36 PM |
Oil In The Manifold Intake Of 190e, 2.6l.1988 | MARIO FARIAS | Diesel Discussion | 4 | 12-22-2003 01:03 PM |
Replaced intake manifold gasket and now won't start - 300 SDL | tstarr | Diesel Discussion | 0 | 11-04-2003 08:11 PM |
98 C280 loose air boot at intake manifold | shane83SD | Tech Help | 2 | 11-01-2003 12:54 AM |
103 Intake & Exhaust Manifold Specs | Kyle Blackmore | Tech Help | 2 | 06-30-2003 12:44 AM |