stromberg su carburetor of a 200 gas 123, 115 engine
 

i have a 123 80s model , 115 engine. would like to know if i put the small vacuum hoses right there are several of them and i dont know if i put them at there right places. if you guys could help me or post a picture of a same engine carb. would appreciate it and from there i would just copy what you have posted in the picture hoping it is right. im not sure with the dashpot hose and the advance timing hose, the idle up hose etc. thanks hope to hear from u guys.

I have a scan of the stromburg 175 model if it will help. LEt me know your email or fax and I will get it to you.
I had the same issue on mine, I plugged the lines on the manifold connections ans the car ran better. On mine they were an early attempt at pollution control
Not really worth fiddling with. The other on the pull off and point advance are important the diagram will give you an idea where to put them.
Let me know

hi thanks for the reply my email address is ptmar@hotmail.com. thanks and hope to hear from you . have a nice day:)

pls check this picture.

http://s54.photobucket.com/albums/g95/ptmar/?action=view&current=DSC02406.jpg