Hi all,

I have a small problem with the electrical windows on my 450sl. When I close the door it makes a trembling sound on both doors. So I removed the panel and good see that the window is gliding up and down in a metal U. The windows is smaller than the metal U and a metal S shaped thing should be on stuck on the window and glide over the metal U. On my car the S shape thing was on the bottom of the door.
Now the question, how does this metal S thing get stuck on the window? With glue?

Thanks in advance for any help.

Jeroen

Epoxy works good, but you wiil have to take some of the play
(clearance) between guide & glass first. I use thin strips of plastic to tighten the guides to the glass.

Thanks M.B. Doc for the answer. I have just the thin plastic strips and that seems to work fine.

Jeroen