|
|
|
|
|
#1
03-20-2001, 03:51 PM
|
|||
|
|||
|
Need some installation advice about installing the Header Pipe (123-490-82-19) which I purchased at the Fast Lane.
My current header pipe (exhaust pipe connecting to the turbo and running under the car) has a hole. I ordered a replacement OEM part at the Fast Lane. If I am able to loosen the bolts do I have enought clearance to remove the pipe? I am not sure if I can pull the defective header pipe through the hood area or from underneath? Has anyone removed this pipe with the car just sitting on the ground and not on a hoist? I don't want to loosen and remove all the bolts just to find out that I will have to take it to a shop that can raise the car high off the ground. The car is a 1984 300D Turbo. Thanks for any enlightenment! Joe 
|
|
#2
03-20-2001, 08:56 PM
|
|||
|
|||
|
Using the OE jack to gain access, I don't see a problem...You will have to crawl under the car to get the bottom bolts out.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Exhaust header pipe? | rhino | Diesel Discussion | 2 | 01-10-2005 08:40 PM |
| Cowl Header Panel Replacement - Boo, Hoo!! | Strife | Mercedes-Benz SL Discussion Forum | 0 | 09-11-2004 01:31 AM |
| flex pipe replacement parts list | JHZR2 | Diesel Discussion | 6 | 12-19-2003 01:26 PM |
| flex pipe replacement | JHZR2 | Diesel Discussion | 2 | 12-09-2003 05:29 PM |
| Header Pipe replacement | Steve300 | Diesel Discussion | 2 | 04-29-2003 05:01 PM |
Linear Mode
