Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-18-2001, 02:41 PM
Posts: n/a
Does anyone know a workaround for my alarm and the MB door lock switch on front panel. I have the Clifford concept 600 with auto door lock mechanism kicking in at 2200 RPM. The switch will not work when the doors lock from alarm. I cannot open doors except manually or by shutting off ignition. The switch works fine until the alarm auto locks. My shop has been pulling their hair out trying to find the right place to tap into the auto door locks to enable the switch to be used manually and still have the auto locking from the alarm take place. Any suggestions would be appreciated Thanks

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page