PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   210 N22 version coding (http://www.peachparts.com/shopforum/tech-help/154182-210-n22-version-coding.html)

Matt L 05-24-2006 11:23 PM

210 N22 version coding
 
The 210 N22 takes various parameters for the version code P2.

On my '96, the applicable values are apparantly:

+08 - Blower mode bar graph switched on by "AUTO"
+16 - Refridgerant fill level check switched off
+128 - "SMOG" display switched off

Mine was coded at 144 (16+128). I changed it to 8, to display the bar graph in auto mode, which didn't happen. I have no idea if the "SMOG" display works.

Is there something else that needs to be done to honor this code?

mbdoc 05-25-2006 07:54 AM

Try 136...USA cars don't have smog sensor so add the 128 + 8...

Matt L 05-25-2006 09:23 PM

144, 8, 136 all seem the same. Of course, were there a smog sensor it wouldn't be going off and there should be enough refridgerant to let it start. But still no bar graph.

Perhaps I'm misreading the manual, or perhaps the N22 in my car doesn't take this code. Any idea?

I'd also like it to read in C, but that appears to be a no-go.


All times are GMT -4. The time now is 10:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website